MBuy Audio Technica BP892CL4 MicroSet (Tan) for Sennheiser L

BP892 Subminiature Omnidirectional Condenser Headworn Microphone, less power module. 1.4 m (55") permanently attached miniature cable terminated for Sennheiser wireless systems using Lemo connector. Includes AT8440 cable clip, AT8464 dual-ear microphone mount, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case.

• Handles high sound pressure levels with ease
• Extremely intelligible natural audio
• Inconspicuous, lightweight headset with capsule diameter of just 2.6 mm is ideal for applications requiring minimum visibility
• Ergonomic under-ear designflexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses
• Comes equipped with AT8464 Dual-Ear Microphone Mount that converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort
• Available in black and beige, wired and wireless models

Audio-Technicas high-SPL BP892 MicroSet offers the ultimate in low-profile, high-performance audio. Delivering clear and accurate sound in an inconspicuous package, the ultra-lightweight BP892 hooks securely behind either ear and can be worn for hours without fatigue. For maximum stability and comfort, the included AT8464 dual-ear microphone mount converts the MicroSet to a dual-ear-worn unit.

The microphone features a flat, extended frequency response and other outstanding performance specifications, resulting in extremely intelligible, natural audio for stage and television talent, lecturers and houses of worship. Protected by a highly durable Parylene coating, the new headworn mic is built to stand up to the rigors of day-to-day use.

• Handles high sound pressure levels with ease


• Extremely intelligible natural audio


• Inconspicuous, lightweight headset with capsule diameter of just 2.6 mm is ideal for applications requiring minimum visibility


• Ergonomic under-ear designflexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses


• Comes equipped with AT8464 Dual-Ear Microphone Mount that converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort


• High-pass filter on power module provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

Available in black and beige, wired and wireless models:
BP892 includes AT8539 power module
BP892-TH same as BP892, but in "theater" color (beige)
BP892c less power module; 55" (1.4 m) cable, unterminated
BP892c-TH same as BP892c, but in "theater" color (beige)
BP892cW less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak wireless systems
BP892cW-TH same as BP892cW, but in "theater" color (beige)
BP892cL4 less power module; 55" (1.4 m) cable terminated for Sennheiser wireless systems using Lemo connector
BP892cL4-TH same as BP892cL4, but in "theater" color (beige)
BP892cLM3 less power module; 55" (1.4 m) cable terminated for Sennheiser wireless systems using locking 3.5 mm connector
BP892cLM3-TH same as BP892cLM3, but in "theater" color (beige)
BP892cT4 less power module; 55" (1.4 m) cable terminated with TA4F-type connector for Shure wireless systems
BP892cT4-TH same as BP892cT4, but in "theater" color (beige)
BP892cT5 less power module; 55" (1.4 m) cable terminated with TA5F-type connector for Lectrosonics wireless systems
BP892cT5-TH same as BP892cT5, but in "theater" color (beige)

Specifications:

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Omnidirectional
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 18 dB/octave (wired only)
• Open Circuit Sensitivity: 49 dB (3.5 mV) re 1V at 1 Pa
• Impedance: 250 ohms (wired only)
• Maximum Input Sound Level: 135 dB SPL, 1 kHz at 3% T.H.D.
• Dynamic Range (Typical): 104 dB, 1 kHz at Max SPL (wired only)
• Signal-To-Noise-Ratio: 63 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 2 mA typical (wired only)
• Switch: Flat, roll-off (wired only)
• Current Consumption: 0.1 mA typical at 5V (wireless only)
• Voltage Range: 2.5-11V (wireless only)
• Weight (microphone): Microphone, boom & earpiece: 2.6 g (0.09 oz)
• Weight (power module):85 g (3.0 oz)
  (wired only)
• Dimensions: Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
  Boom: 98.4 mm (3.87") long, 1.07 mm (0.04") diameter
• Dimensions (power module): 97.6 mm (3.84") long, 18.9 mm (0.74") diameter
  (wired only)
• Output Connector (power module): Integral 3-pin XLRM-type
• Cable: 1.4 m (55") long (permanently attached to microphone), 1.6 mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
• Accessories Furnished: BP892: AT8539 power module (wired only); AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip (wired only); carrying case
  BP892-TH: AT8539 power module (wired only); AT8440 cable clip; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; belt clip (wired only); carrying case
• Audio-Technica Case Style: M31