{"product_id":"se-x1-s-studio-bundle-x1-s-microphone-with-reflection-filter-x-shockmount-and-cable-pack","title":"SE X1-S-STUDIO-BUNDLE X1 S Microphone with Reflection Filter X, Shockmount and Cable Pack","description":"\u003cbr\u003esE Electronics X1 S Large-Diaphragm Cardioid Condenser Microphone\u003cbr\u003eThe SE Electronics X1 S is a large-diaphragm cardioid condenser microphone designed for versatile, full-range vocal and instrument recording in commercial facilities, project studios, home setups, and mobile rigs. The handcrafted gold-sputtered capsule features a pressure-gradient design for directional focus and rejection of off-axis sounds. It utilizes a gold-plated XLR 3-pin jack and requires 48V phantom power.\u003cbr\u003e\u003cbr\u003eThe metal-bodied X1 S delivers a 20 Hz to 20 kHz frequency response and a selectable 80 Hz or 160 Hz low-cut filter to reduce rumble and low-frequency buildup. A switchable -10 dB or -20 dB pad minimizes distortion when miking loud sources such as drums and amplified guitars. Even without a pad, the X1 S can handle a maximum SPL of 140 dB. It ships with a mic clip and thread adapter for easy mounting on a mic stand.\u003cbr\u003e\u003cbr\u003eThe X1 S utilizes a handcrafted condenser capsule, meticulously constructed and tuned in SE's capsule room by technicians with decades of experience\u003cbr\u003eIts internal redesign allows for improved sensitivity, dramatically increased SPL handling (up to 160 dB), and a large reduction in self-noise\u003cbr\u003eThe -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques\u003cbr\u003eSelectable at either 80 Hz or 160 Hz, the two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques\u003cbr\u003eThe X1 S's all-metal chassis provides efficient rejection of electrical interference and noise\u003cbr\u003eA gold-plated XLR connector ensures loss-free, reliable signal connection\u003cbr\u003e\u003cbr\u003eThe gray sE Electronics RF-X Reflexion Filter X is a budget-friendly solution for vocalists, podcasters, and narrators who need to reduce unwanted room ambience while recording in untreated acoustic environments. This reflection filter merges technology from the upscale Reflexion Filter PRO with a lightweight body and an easy-to-use clamp assembly.\u003cbr\u003e\u003cbr\u003eIt features a four-layer acoustic filter design to effectively impede room reflections and keep sound coloration to an absolute minimum. The RF-X clamp assembly's lightweight design can be used on almost any microphone stand while allowing the position of your mic to be adjusted horizontally without moving your mic stand or the RF-X. Thanks to the L-bracket, you can also adjust the height of the RF-X.\u003cbr\u003e\u003cbr\u003eTechnology from Reflexion Filter PRO\u003cbr\u003eUsing the same design technology as the industry-standard Reflexion Filter PRO, the RF-X was conceived to answer the needs of the discerning recording artist working on a budget. With its lightweight vented body and an efficient redesigned clamp assembly, the RF-X is simplicity itself, providing stellar performance and ease of use.\u003cbr\u003e\u003cbr\u003eSpecialized Design\u003cbr\u003eNew materials have been developed to make the RF-X lighter than its predecessors while maintaining its durability, helping to position the RF-X as a versatile product suited for any challenging working environment. It features a four-layer acoustic filter design comprised of the outer vented composite panel, a wool fabric layer, an air gap layer, and an inner acoustic foam layer.\u003cbr\u003e\u003cbr\u003eMinimal Sound Coloration\u003cbr\u003eThis multilayer design differentiates the RF-X from typical designs by filtering frequencies evenly across the whole spectrum, helping to ensuring that recordings exhibit almost zero sound coloration when using the filter.\u003cbr\u003e\u003cbr\u003esE Electronics Isolation Pack - Shock Mount and Pop Filter for Magneto, X1 \u0026amp; sE 2200a II Series\u003cbr\u003eThe sE Electronics Isolation Pack is a quick-release shock mount that is designed specifically for the Magneto, X1 Series (sE X1, X1 Vocal Pack and X1 Studio Bundle) and sE 2200a II series (sE2200a II MP and sE2200a II C) of microphones. It can be used by professionals and amateurs alike to capture vocals free of pops caused by vocal plosives and low end rumble and noise caused by unwanted vibrations.\u003cbr\u003e\u003cbr\u003ePop shield features metal as opposed to a fabric shield for durability","brand":"SE Electronics","offers":[{"title":"Default Title","offer_id":43315650003062,"sku":"99553","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/5742\/3222\/files\/media_9d6a3a42-dca5-4db5-9d84-06a85091c688.jpg?v=1779944721","url":"https:\/\/www.georgesmusic.com\/products\/se-x1-s-studio-bundle-x1-s-microphone-with-reflection-filter-x-shockmount-and-cable-pack","provider":"George's Music","version":"1.0","type":"link"}